Hotpoint EG95 Instruction And Recipe Book page 17

Clock & Automatic Oven Timer Operation
12
1
11
10
2
0
50 10
3
40
20
30
8 4
7 5
6
12
1
11
10
2
0
50 10
3
40 20
30
8 4
7 5
6
12
1
11
10
2
0
50 10
3
40 20
30
8 4
7 5
6
12
1
11
10
2
0
50
3
40
20
30
8 4
7 5
6
12
1
11
10
2
0
50 10
3
40
20
30
8 4
7 5
6
TO SET & RE-SET THE TIME OF DAY
A
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is switched on.
B
Step 3 Pull knob (B) and turn clockwise until the correct time of day is
shown.
Step 4 Ensure that the yellow / Gold Long minute minder finger remains at
A
the position.
If it is not, return the yellow / Gold Long finger to the
on the clock face by turning (without pulling) knob (B) anti-clockwise.
B
Note: For normal "Manual" operation of the oven(s) the timer
should always be set at
shown). See Below.
TO SET THE TIMER FOR MANUAL OVEN OPERATION
Note: Unless you set the timer for an Auto Cooking Programme,
for normal "Manual" operation of the oven(s) the timer should
always be set to the
If the
A
Step 1 Turn the upper knob (A) clockwise (without pulling) until the
symbol does appear in the display window.
B
USING THE MINUTE MINDER – (YELLOW / GOLD LONG
FINGER)
Here you can set a "Minute Minder" function of up to 55
minutes. At the end of the set time. a bell will ring for
approximately 4 minutes.
Note: The figures on the inner dial are for setting the Minute
Minder.
A
Step 1 To set "Minute Minder" finger to the required time, turn (without
pulling) lower knob (B) anti-clockwise, until the yellow / gold long
finger is at the time required.
B
Example: 10 minutes (as shown).
At the end of the Minute Minder period a bell will sound.
A
Step 2 To cancel the bell turn (without pulling), lower knob (B) anti-
clockwise until yellow / gold long minute minder finger is returned to
the position on the clockface (as shown).
B
the position in the display window (as
position.
symbol does not appear in the display window :-
position
17