Table of Contents
Advertisement
OPERATION AND USE - Menus (continued)
Setting Daily, One Time, and Trigger Block Programmed Event Times:
SET DAILY EVENT MENU (enter from SELECT
EVENT TYPE Menu selection # 1)
To set a daily event (occurs each day, seven days a
week), set the start time and end time. An AM or PM
prompt will be given after each time input. To set addi-
tional daily events after entering the first one, press for-
ward with the + button on the remote. You can review
each Daily Event by pressing the -/+ buttons on the
remote. Observe the number of each block set in the
upper left hand corner of the menu screen.Up to five
separate events can be set. SEE OPERATIONS AND
USE "FUNCTIONAL DESCRIPTIONS" for additional
requirements.
SET ONE TIME EVENT MENU (enter from SELECT
EVENT TYPE Menu selection # 2)
Set a one time event (occurs one time only) by setting
the start time, the start date, and the end time. To set
additional one time events after entering the first one,
toggle forward with the + key on the remote. Up to five
separate one time events may be set. You can review
each One Time Event by pressing the -/+ buttons on
the remote. Observe the number of each block set in
the upper left hand corner of the menu screen. A entire
event can be cleared by pressing the CLEAR button on
the remote during review. SEE OPERATIONS AND
USE "FUNCTIONAL DESCRIPTIONS" for additional
requirements.
SET TRIGGER BLOCK TIME MENU (enter from
SELECT EVENT TYPE Menu selection # 3)
Set a trigger block to disable all normally open and nor-
mally closed event triggers from starting the record
function. Trigger blocks DO NOT disable a PANIC
RECORD trigger. To set additional trigger block times
after entering the first one, press the + button on the
remote. Up to three separate trigger block times may
be set. You can review each trigger block setting by
pressing the -/+ buttons on the remote. Observe the
number of each block set in the upper left hand corner
of the menu screen. A entire trigger block can be
cleared by pressing the CLEAR button on the remote
during review. Trigger block start times must be for a
"future" time. SEE OPERATIONS AND USE "FUNC-
TIONAL DESCRIPTIONS" for additional requirements.
9
Advertisement
Table of Contents
