Using The Universal Locator; Charging The Battery - Zoombak A-GPS Locator User Manual

Using the Universal Locator

This section addresses seven primary areas:

• Charging the Battery

• Battery Life
• Powering the Universal Locator ON/OFF
• Monitoring the Universal Locator Status
• General Usage Tips
• Placing the Locator in Your Car
Charging the Battery
Before activating and using the Zoombak Universal Locator for the
first time, you will need to fully charge the battery. Follow these
simple instructions to charge the battery. The initial battery charge
time will be 6 hours; each subsequent battery charge will be
approximately 4 hours.
1. Remove the Zoombak Universal Locator and AC Wall Charger from
the Zoombak Universal Locator package.
2. Plug the AC Wall Charger into a wall outlet.
3. Attach the Zoombak Universal Locator
to the AC Wall Charger via the USB
Charger Jack on the Zoombak
Universal Locator.
4. The Locator Status LED
Indicator will glow amber
(yellow-orange), indicating
that the Zoombak Universal
Locator is charging.
5. Once the Locator Status LED Indicator
glows green, this will signal that the
Zoombak Universal Locator is fully charged.
4
zoombak.com