Christie LW400 User Manual page 63

NETWORK Menu (continued)
Item
INFORMATION
SERVICE
LW400 User Manual - Operating Guide
Selecting this item displays the NETWORK -INFORMATION- dialog
for confirming the network settings.
• The PROJECTOR NAME is displayed.
• Nothing (blank) is shown in the "PROJECTOR NAME" field until
you setup the item (
• When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
date and time are input. Replace the battery suitably (
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
"0.0.0.0" when DHCP is ON and the projector has not gotten
address from DHCP server.
Executing this item restarts and initializes the network functions.
Choose the RESTART using the button ►.
Then use the button ▲ to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, NETWORK Menu may not be controlled
approx. 30 seconds.
Description
59).
61
NETWORK Menu
66).
020-000048-02 Rev. 1 (03-2009)