Panasonic PT-DZ10K Spec File page 10

S F
P E C I L
3-Chip DLP ™ Projector
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
•
When the lens except the ET-D75LE6 is mounted
(Width of
0.2H projected image)
Standard postition of projected image
NOTE: Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Vertical direction in portrait mode with the
ET-LAD320P/LAD320PW mounted
The projector may be installed at a vertical
angle of ±15°.
NOTE: The projector cannot be vertically installed all by itself. Also, the terminal side must face downward when vertically installed.
As of April 2013
SFD12M023
E
H
0.2H
•
When the ET-D75LE6 is mounted
(Width of
0.15H projected image)
Standard postition of projected image
• Horizontal direction
The projector may be installed at a horizontal
angle of ±15°.
• Horizontal direction in portrait mode with
the ET-LAD320P/LAD320PW mounted
The projector may be installed at a horizontal
angle of ±15°.
PT-DZ10K
H
0.15H
1 0 / 1 7