Compaq 281862-002 User Manual page 54

4-6 Using Integrated Remote Console
1-9
↑ or I
↓ or M
Tab
[Atn] Esc
Enter
Esc
Page Up or O
Page Down or ,
(comma)
Space
Home or U
End or N
If your terminal emulator does not support the arrow keys, you can still
generate these keys by using attention key sequences (described in detail in
Chapter 5). The attention key sequence for generating the up and down arrow
keys in Remote Console mode is [Atn]I and [Atn]M respectively. For this
example, the attention key method is used to move the selector to the "MS-
DOS" entry.
Key Functions for Navigating the IRC Menu System
Key
Moves and selects the corresponding menu item
Scrolls the highlighted selection up. The "I" key can be used to
navigate the menus from ANSI terminal programs that do not support
the up and down arrow keys.
Scrolls the highlighted selection down. The "M" key can be used to
navigate the menus from ANSI terminal programs that do not support
the up and down arrow keys.
Moves to the next selection.
Exits the Remote Console session. This is a two-key sequence
performed by first pressing the user-definable attention key and then
pressing the Esc key. See Chapter 5 for more information on entering
attention key sequences.
Displays the next level menu, detail information for a selected item, or
terminates editing and accepts changes.
Cancels the current event and returns to the previous screen. A
confirmation message is displayed to verify that you have saved any
changes.
Displays the previous page.
Displays the next page.
Toggles between two options.
Returns to the top.
Moves to the bottom.
Table 4-1
Function