Pairing with your device
Pairing is the process connecting two devices over
Bluetooth and allowing them to communicate. You
will need to go through the pairing process each
time you use the XGPS150 with a new device, and
the XGPS150 will automatically try to reconnect to
the last device it was paired with.
Pairing the XGPS150 with the iPod touch, iPad
or iPhone
Settings->General->Bluetooth
and turn on Bluetooth. The device will automati-
cally begin looking for the XGPS150.
status light on the XGPS150 will begin to blink
as
XGPS150-xxxxxx
XGPS150
Setup
in the list of devices on
7