Table of Contents
Advertisement
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles. (Califor-
nia Health & Safety Code 25249.5, et seq. )
Warning: The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety Code 25249.5 et seq.)
Note: Performance of this tool may vary depending on variations in supply air pres-
sure.
Additional Air Hammer Safety Precautions
1.
Disconnect air before servicing. Do not attempt to change chisels,
disassemble, or service tool with air hose attached.
2.
Use only specified operating air pressure. Never operate tool above the
specified operating air pressure range.
3.
Do not use combustible gases. Do not use combustible gases as a power
source, or use tool in areas where combustible gases are stored.
4.
Avoid possible kickback injury. Hold the tool with both hands during
operation so that your head and body are not injured by possible kickback of
the tool.
5.
Use care when transporting tool. Disconnect tool from air supply when
moving tool in the workplace. Carry tool only by the handle without drawing
the trigger.
6.
OSHA Guidelines. Industrial applications must follow OSHA guidelines.
7.
Air Compressor. Read and adhere to all warnings and instructions in the Air
Compressor Instruction Manual.
Warning: The warnings, cautions, and instructions discussed in this in-
struction manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
When unpacking, check to make sure that all the parts are included. Refer to the
Assembly Drawing and Parts List at the end of this manual. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
SKU 92037
Unpacking
For technical questions, please call 1-800-444-3353
Page 4
Advertisement
Table of Contents
