Snmp Configuration - Avocent ACS V6000 User Manual

Acs v6000
Table of Contents

Advertisement

Field Name
Remote (Right) Side - and - Local
(Left) Side
RSA Key (If RSA Key is selected)
Pre-Shared Secret (If Secret is
selected)

SNMP Configuration

An administrator can configure SNMP, which is needed if notifications are to be sent to an
SNMP management application.
NOTE: The Avocent ACS v6000 Enterprise MIB text file is available in the appliance at: /usr/local/mibs/ACSv6000-
MIB.asn. The Avocent ACS v6000 Enterprise TRAP MIB text file is available in the appliance at:
/usr/local/mibs/ACSv6000-TRAP-MIB.asn. Both files are also available at www.avocent.com.
To configure SNMP:
1. Click Network - SNMP.
2. Click the System button and enter the SysContact information (email address of the virtual
console server's administrator, for example,
3. Click Add to add a new community or v3 user.
4. Enter the community name for SNMP v1/v2 or the user name for SNMP v3 in the Name
field and enter the OID.
5. Select the desired permission from the pull-down menu. Choices are Read and Write or
Read Only.
Chapter 3: Accessing a Virtual Console Server via the Web Manager
Definition
Enter the required address or text for each of the four fields for both Remote
Side and Local Side: ID: This is the hostname that a local system and a
remote system use for IPSec negotiation and authentication. It can be a fully
qualified domain name preceded by @. For example,
hostname@xyz.com
The router through which the virtual console server (on the left side) or the
remote host (on the right side) sends packets to the host on the other side.
SubNet: The netmask of the subnetwork where the host resides. Use CIDR
notation. The IP number followed by a slash and the number of 'one' bits in
the binary notation of the netmask. For example, 192.168.0.0/24 indicates
an IP address where the first 24 bits are used as the network address. This
is the same as 255.255.255.0.
For IPSec(VPN) authentication, you need to generate a public key for the
virtual console server and find out the key used on the remote gateway.
Copy and paste for copying the RSA key from another source is supported.
Pre-shared password between left and right users.
IP Address: The IP address of the host. NextHop:
acsv6000_admin@avocent.com
27
).

Advertisement

Table of Contents
loading

Table of Contents