Panasonic Lumix DMC-ZS15 Owner's Manual page 30

■
Recording motion pictures in
Records a motion picture at your preferred settings.
• Aperture and shutter speed are automatically set.
■
Recording motion pictures in
The camera automatically detects the scene to record motion pictures with optimal settings.
When scene does not
correspond to any on the right.
• In mode, focus and exposure will be set according to the face detected.
• will be selected for nightscapes and other dark scenes.
• If the camera does not select your desired Scene Mode, choosing an appropriate
mode manually is recommended.
• The following menu options in the [Motion Picture] menu can be set:
• [Rec Mode] • [Rec Quality]
■
Motion picture recording in other recording modes
For details, refer to the pages relating to the respective recording modes. (However, a
motion picture cannot be recorded in [Panorama Shot] Scene Mode.)
●
The available recording time displayed on the screen may not decrease regularly.
●
If data is repeatedly recorded and deleted, the total available recording time on the SD
card may be reduced. To restore the original capacity, use the camera to format the
SD card. Be sure to save all important data to your computer or other media before
formatting, as all data saved to the card will be erased.
●
The Optical Image Stabilizer functions regardless of the settings before a motion picture
is recorded.
●
The following functions are not available:
AF tracking, Extended optical zoom, flash, [Face Recog.], [Rotate Disp.] for pictures
taken vertically.
●
For certain memory cards, recording may end while in progress.
●
The recording range may become narrower in motion pictures compared to still
pictures. Also, if the Aspect Ratio is different for still pictures and motion pictures, the
angle of view will change when starting to record a motion picture. The recordable area
is displayed by setting [Video Rec Area] (→44) to [ON].
●
If you end motion picture recording after a short time when using [Miniature Effect]
of the [Creative Control] Mode, the camera may go on recording for a certain period.
Please continue to hold the camera until the recording finishes.
●
If Extended optical zoom was used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be larger.
●
Depending on the environment when recording motion pictures, the screen may
turn black for an instant or noise may be recorded because of static electricity,
electromagnetic waves, etc.
●
Use a sufficiently charged battery.
- 30 -
Taking motion pictures