Direct Operation
Choose Video or S-video by pressing the VIDEO or the S-
VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
▲▼
press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
Use the Point
buttons to select Computer 1. And then
▲▼
press the Point
button to access the submenu items. Use
►
the Point
buttons to select the S-video and then press
▲▼
the SELECT button.
When the input source is coming from video
S-video
equipment connected to the COMPUTER IN
1/S-VIDEO IN/COMPONENT IN terminal with a
S-video-VGA cable, select S-VIDEO.
✔Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
6
Video Input
Input Source Selection (Video, S-video)
buttons to select Input and
▲▼
the SELECT button.
► or
buttons to select Video and then
Remote Control
VIDEO button
S-VIDEO button
Input Menu
Computer
1
Video
S-video
Auto
Auto