Radio Shack Ni-Cd/Ni-MH Universal Battery Charger Owner's Manual

23-425.fm Page 1 Monday, July 10, 2000 8:04 AM
Ni-Cd/Ni-MH Universal Battery Charger
Your RadioShack Ni-Cd/Ni-MH Universal
Battery Charger can fully charge up to five
different sizes of nickel-cadmium and nickel-
metal hydride batteries. It can charge AAA,
AA, C, D and 9V batteries with different ca-
pacities in different bays.
Your charger's features include:
Multiple Charging Circuits — allow you to
charge two or four AAA, AA, C, or D size
nickel-cadmium or nickel-metal hydride bat-
teries, or one or two 9-volt batteries.
Automatic Charging Current Selection —
selects the best charging current for each
battery size.
Automatic Shut-off — special circuit sens-
es when the battery is fully charged and au-
tomatically terminates the charging.
Reverse Polarity Protection — protects the
charger and batteries against incorrectly in-
stalled batteries.
Safety Timer Shut–Off — turns off the
charger to prevent overcharging AAA, AA, C,
or D batteries.
Short Circuit Protection — protects the
charger and batteries against shorting.
Battery Conditioner — lets you discharge
AAA, AA, C, or D batteries before recharging
them, keeping them completely fresh.
Charging/Discharging Indicators — light
when the batteries are charging/discharging.
OWNER'S MANUAL — Please read before using this equipment.
Overcurrent Protection — protects the
charger when charging defective or shorted
batteries.
WARNING:
shock hazard, do not expose this product to rain
or moisture.
CAUTION:
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
!
IMPORTANT SAFETY
INSTRUCTIONS

Save These Instructions!

Danger: To reduce the risk of fire or electric
shock, carefully follow these instructions.
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
To reduce the risk of fire or
CAUTION
!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
TO REDUCE THE RISK OF
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product's enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product's case.
This symbol is intended to inform
you that important operating and
maintenance instructions
included in the literature accom-
panying this product.
are