Connecting To Audio Equipment; Connecting To An Av Amplifier (Via Digital Audio Input) - Toshiba SD-P71SKN Owner's Manual

Connecting to audio equipment
Q
Signal flow
The following audio systems are
compatible:
To digital audio input (coaxial)
AVamplifier
· Dolby Digital
· DTS
· MPEG2 audio
· 2 channel digital stereo
Coaxial digital
cable
(not supplied)
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
Make the
Setting
Select: Page
following
"Bitstream"
setting.
"Digital Out" or 58
"PCM"
Con.,ecting to an AVamplifier (v:ia
,digital audio input)
,....-0----- ~TSTREAMiI'CM
AV OUT AV IN
~
@ @
~ ~ ~~g
-----f
To BITSTREAM/PCM
Caution
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• Turn off the amplifier before you connect or disconnect the
player's power cord. If you leave the amplifier power on, the
speakers may be damaged.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound.
You can enjoy high quality dynamic sounds by
connecting the player to audio equipment.
The connecting method depends on the types of audio
input, digital or audio.
Select the method according to the type of your
equipment.
(/)
c:
o
;;
g
Notes
~
• Refer to the owner's manual of the connected equipment as
o well.
o
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
64
"DTS" and "DTS Digital Out" are registered trademarks of DTS, Inc.