Controls And Adjustments; A) Default Dip Switch Settings - Hoshizaki KM-1601SAH/3 Service Manual

3. Controls and Adjustments

Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact
Hoshizaki Technical Support at 1-800-233-1940.

a) Default Dip Switch Settings

Note that the settings vary for KM-1601SRH/3 depending on the water valve installed.
The dip switches are factory set to the following positions:
Auxiliary
Model Code
KM-1601SAH/3 Dip switch settings for air-cooled units
"G" Control Board are as listed, regardless of auxiliary
code.
KM-1601SWH/3 Dip switch settings for water-cooled
"E" Control Board units are as listed, regardless of
auxiliary code.
KM-1601SRH/3 R-0, R-1,
"E" Control Board some S-1
Some S-1
S-2 & later
V-1 (M) & later 4A5251-04 (11 l/min)
S5 Dip Switch (Do Not Adjust)
Model 1
KM-1601SAH/3 OFF OFF OFF OFF OFF
KM-1601SWH/3
KM-1601SRH/3
S4 Dip Switch
All Models
Freeze Timer (9 & 10)
Factory Use (8)
Harvest Pump Timer (7) KM-1601SAH/3 "G" Control Board
Bin Control Selector (7) KM-1601SWH/3 & KM-1601SRH/3
Pump-Out Frequency Control (5 & 6)
Pump-Out Timer (3 & 4)
Harvest Timer (1 & 2)
Water
Valve Part
Number
3U0111-02
(8 l/min)
3U0111-01
(15 l/min)
4A1176-04 (11 l/min)
S5 Dip Switch No.
2 3 4 5
Not Applicable
"E" Control Board
CAUTION
S4 Dip Switch
Code on
Water
1 2 3
Valve
OFF OFF ON ON ON ON ON OFF OFF OFF
OFF OFF OFF OFF ON ON OFF OFF OFF ON
J248-032
ON OFF ON OFF OFF OFF OFF OFF OFF OFF
J248-030
ON OFF OFF OFF ON ON OFF OFF OFF OFF
KM-1601SAH/3 "G" Control Board
32
S4 Dip Switch No.
4 5 6 7 8
S5 Dip Switch
Refill Counter (2 through 5)
Float Switch Selector (1)
9 10