Replacing The Palm Rest; Procedure; Post-Requisites - Dell Inspiron 14 Owner's Manual

Replacing the Palm Rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Follow the procedure from step 1 to step 3 in "Replacing the Touchpad".
2 Follow the procedure from step 1 to step 4 in "Replacing the
Button Board".
3 Align the palm rest over the computer base.
4 Press down on the edges of the palm rest to snap it into place.
5 Replace the screws that secure the palm rest to the computer base.
6 Slide the touchpad cable and the power-button cable into the
connectors on the system board and press down on the latches to
secure the cables.
7 Adhere the tape back on the power-button cable.
8 Close the display and turn the computer over.
9 Replace the screws that secure the palm rest to the computer base.

Post-requisites

1 Replace the
2 Replace the
3 Replace the keyboard.
4 Replace the battery.
hard drive.
base cover.
Computer. After working inside your
After Working Inside Your
Power-
41