Advertisement
1
TRIM INSTALLATION
Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
Align ESCUTCHEON (1). Thread ESCUTCHEON HOLDER (2) onto DIRVERTER VALVE (3).
Tighten until ESCUTCHEON (1) is snug against fiished wall.
2
HANDLE INSTALLATION
Push HANDLE ADAPTER (1) onto VALVE STEM (2).
Turn VALVE STEM (2) to off position.
Push HANDLE ASSEMBLY (3) onto HANDLE ADAPTER (1).
In stall HANDLE SCREW (4) and tighten.
Push INDEX BUTTON (5) into HANDLE ASSEMBLY (3).
3
OPERATING THE VALVE
Turn water supply on and test installed fitting.
Rotate handle to all diverter positions to check operation of valve.
Check for leaks.
3
1
2
3
2
1
OFF
4
5
M 9 6 8 6 5 6
Advertisement
