Operation At A Glance: Transmitter - Tamrac MicroSync II User Manual

Operation at a Glance: Transmitter

Test Fire
Button
Press to
manually fire
strobes.
Channel Select Button
Press once and the LCD will display the
current channel. When pressed again,
channel will change to next channel.
LED
Flashes to
confirm
signal trans-
mission and
channel
change.
Hot Foot
Slips into the
hot shoe of
most cameras.
Please Note: There are no on/off buttons on the transmitter or receiver
because they feature an automatic power management system. Both units
remain in a state of 'sleep' until the instant they are used.
Battery Compartment Door
Replace battery when the battery
icon on LCD flashes.
Displays channel and
battery level. Battery
icon will flash when
battery is low.
Transmitter Input
Can be used with a
sync cord to connect
the transmitter to a
camera's sync
terminal.
Locking Ring
Used to secure the
transmitter into the
hot shoe.
4
LCD