Sony DNW-A100 Brochure & Specs page 8

525/60
or 625/50 Versatility
SDDI, SDI and component I/O and composite outputs are all
switchable from 525/60 to 625/50. When playing back
Betacam SX recordings, the DNW-A100/A50/A45 operates in 525/60
mode without an external adapter.
Versatile
System Interface
SDI Interface
The DNW-A100/A50/A45 is equipped with SDI I/O, allowing easy
interfacing with existing SDI systems.
SDDI Connections
For high-speed transfer of video/audio material at faster than
normal play speed, SDDI outputs are provided with the
DNW-A100. Various output speeds can be selected. An SDDI
input can be added as an option (BKNW-103).
Analog Composite/Component Input
Either a BKDW-506 analog composite input board or a
BKNW-104 analog component input board can be fitted as an
option.
Analog Composite/Component Output
The DNW-A100/A50/A45 is equipped with three analog composite
outputs (one monitor output with character superimposition) and
one component output.
Equipped
for ISR
The DNW-A100/A50/A45 all incorporate the Sony Interactive
Status Reporting (ISR) system to provide error/warning reports on
the equipment, enabling engineers to take appropriate action to
correct the situation.
Analog 4ch Audio Input/Output
AES/EBU Input/Output
AES/EBU digital audio inputs/outputs can be fitted as an option
(BKNW-105) in place of analog 4ch audio inputs/outputs.
Time Code Input/Output
SCSI I/F
The DNW-A100/A50/A45 is equipped with an SCSI output to an
external disk drive, BKNW-116.
Remote Control
Editors can remotely control the DNW-A100/A50/A45 through a
Sony 9-pin interface.
RS-232C Remote Control
Various parameters can be set up and monitored via this port
using the Sony ISR system.
DNW-A100 Front Sub-panel
DNW-A100 Rear Panel