Subscribe to Our Youtube Channel
Related Manuals for Anritsu MG3690A
Summary of Contents for Anritsu MG3690A
- Page 1 Technical Datasheet MG3690A RF/Microwave Signal Generators 0.1 Hz to 65 GHz/110 GHz MG 3690 A the ideal signal generator...
-
Page 2: Specifications
Specifications Frequency Coverage: User-selectable linear or log sweep. Linear/Log Sweep: In log sweep, step size logarithmically increases with frequency. Model/Option No. Frequency Coverage Output Type User-selectable number of steps or the step size. Steps: MG3691A 2 to 8.4 GHz K(f) Variable from 1 to 10,000 Number of Steps: MG3692A... - Page 3 The instrument responds to the published GPIB Emulations: Returns all instrument parameters to predefined default Reset: commands and responses of the Anritsu Models 6600, 6700, states or values. Any pending GPIB I/O is aborted. Selectable from and 6XX00-series signal sources. When emulating another the system menu.
-
Page 4: Spectral Purity
Spectral Purity All specifications apply at the lesser of +10 dBm output or maximum specified leveled output power, unless otherwise noted. Spurious Signals Harmonic and Harmonic Related: Power Line and Fan Rotation Spurious Emissions (dBc): O f f s e t f r o m C a r r i e r Frequency Range Standard Frequency Range... - Page 5 –110 Performance –120 (with Option 3) –130 –140 –150 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 10 GHz Typical MG3690A single sideband phase noise at 10 GHz carrier. Standard and Ultra-Low performance with Option 3.
- Page 6 RF Output Power level specifications apply at 25 ±10˚C. Maximum Leveled Output Power**: Output Power Output Power Model Number Configuration Frequency Range Output Power With Step With Electronic (GHz) (dBm) Attenuator (dBm) Step Attenuator (dBm) ≤2.2 GHz w/opt 4 +17.0 +15.0 +13.0 ≤2 GHz...
- Page 7 Internal Power Monitor (Option 8) Sensors: Compatible with Anritsu 560-7, 5400-71, or 6400-71 series detectors. Rear panel input. +16 dBm to –35 dBm Range: ±1 dBm, (+16 to –10 dBm) Accuracy: ±2 dBm, (–10 to –35 dBm)
- Page 8 Modulation Frequency Generator Multiplication/Division Ratios: Frequency/Phase Modulation (Option 12) Frequency Range Divide Ratio, n Option 12 adds frequency and phase modulation, driven externally Ω via a rear panel BNC connector, 50 . For internal modulation, add <10 MHz (Option 22) modulation not available LF Generator Option 23.
- Page 9 Amplitude Modulation (Option 14) Frequency Rise & Fall Pulse Width Video Range Time Overshoot Compression Feedthrough All amplitude modulation specifications apply at 50% depth, 1 kHz (10% to 90%) rate, with RF level set 6 dB below maximum specified leveled ≥10 to output power, unless otherwise noted.
- Page 10 IF signal. The mixer’s RF, LO, and IF ports are simple space-delimited text files containing integer numbers made available at the rear panel of the MG3690A, via three female between 0 and 4095, where 0 corresponds to the minimum K-Connectors.
- Page 11 110 GHz. The 54000 series multipliers provide 50 to 75 GHz coverage in WR15 or 75 to 110 GHz in WR10. An MG3690A with Option 18, mmW bias, is required to drive these multipliers. The MG3692A provides the input frequencies which are below 20 GHz. Higher frequency MG3690A models could be used, but are not necessary.
-
Page 12: Inputs And Outputs
Rear Panel * Options (7 & 18), (7 & 20), (8 & 9) are mutually exclusive, as they share the same rear panel space. ** Connectors may be available but not active, if option is not ordered. MG3690A Rear Panel... - Page 13 AM IN cable interface with the Model 56100A Scalar Accepts an external signal to amplitude Network Analyzer and other Anritsu RF OUTPUT modulate the RF output signal, Option 14. instruments. (see figure below) Provides for RF output from 50Ω...
-
Page 14: Ordering Information
2 – 65 GHz Signal Generator Options and Accessories MG3690A/1A Rack Mount with slides – Rack mount kit containing a set of track slides (90 degree tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 19-inch equipment rack. - Page 15 Aux I/O Cable, 25 pin to BNC: Provides BNC access to Aux I/O Data Lines: Sequential Sync, Marker Out, Bandswitch Blanking, Retrace Blanking, Sweep Dwell In, V/GHz, Horizontal Out. Upgrades Economical upgrades are available to upgrade any model to any higher performing model. Consult Anritsu for details.
- Page 16 Canada (800) ANRITSU Japan 81 (46) 223-1111 South America 55 (21) 2527-6922 Asia-Pacific (65) 6282-2400 http://www.us.anritsu.com Discover What’s Possible ® ©Anritsu, October 2004. All trademarks are registered trademarks of their respective companies. Data subject to change without notice. 11410-00327 Rev. C...
Need help?
Do you have a question about the MG3690A and is the answer not in the manual?
Questions and answers