Dip Switch Settings For Bmw/Mini - DICE Silverline DUO Installation Manual & User Manual

8

DIP switch settings for BMW/Mini

The following DIP switch settings are used to configure the Silverline DUO module to interface
with the various vehicle radios. Before installation, set the DIP switch to the position shown for
the corresponding radios.
BMW
Business CD Radio
OFF
Recommended for single line
display or non-navigation radio
system.
(Mini, 3-series, Z3, Z4, X3)
*4:9 (small screen) navigation radios require special firmware available from DICE Electronics support.
Car configuration switches
BMW
Navigation Radio
OFF
ON
For 16:9 (wide screen)
navigation radio system.
MINI with Navigation
OFF
ON
For 4:9 (small screen)
navigation* and MINI
Cooper with Navigation.
BMW MID Radio
OFF
ON
For non-navigation radio
system on BMW 5, 7, X5
series MID units.
ON