Terminating The Livio Car Internet Radio App - DICE Silverline DUO Installation Manual & User Manual

28
Terminate (kill) the Livio Car Internet Radio app
If you need to terminate (kill) the Livio application please follow the steps below:
1. Double-tap on the home button of the iPhone to bring up the list of running applications. If you don't see the
Livio Car Internet Radio icon right away, swipe the screen left or right to locate it. Note: If you do not see such
task bar but rather a music control popup then you have an iOS device that does not support background run
of applications, therefore this section is not applicable to you.
2. Press and hold the icon of the application until a red minus icon shows.
3. Tap the red minus icon shown on top of the Livio Car Internet Radio icon.
4. This will close the application.
5. In a few seconds, the iPod music playback application should reinitialize itself and become active again. This
can be verified by going back to the list of running applications and swiping the screen unit the music control
section is shown. The iPod application icon next to the music control sections shows that iPod is your audio
source.
Livio Car Internet Radio app settings
Many radio stations offer lower bitrates. Selecting streams with a lower bitrate will reduce data usage and may
reduce stream interruptions during the drive. To adjust bitrates automatically, users can:
Go to the Setting menu of the device, select the Livio Radio settings the change the Maximum Bitrate Filter
and set it to 64K. Other settings such as Buffer time and Reliability filter may also help in getting a more stable
connection.