Connection Diagram For Dsp Option - DICE Silverline DUO Installation Manual & User Manual

12

Connection diagram for DSP option

BMW vehicles with Digital Signal Processing (DSP) must use the DICE DSP Kit (PN: ACC-BMW-DSP).
To confirm if the vehicle has DSP, check for a bare metal coax cable and a 3-pin connector (for connector
locations see page 13). DSP was only an option on some BMW 5-Series, 7-Series, X5, Z4 and X3 vehicles.
connect to DICE
module
connect to car
3-pin connector
BMW Interface Harness (12ft.)
connect to car
coax connector
connect to 12V+
switched power
Power Cable
and ground
RCA/6-PIN DSP Harness
DICE DSP
Converter