GR 024
The built-in 15-watt sewing light illuminates the area of stitching
perfectly. To change the light bulb, remove the face cover, push the
bulb into its socket, turn left, and pull out. When inserting sew light
bulb, be sure to slide bulb pins into socket slots. Press bulb in cpd
turn right.
V
To change the light bulb or oil the
parts at the needle-bar end, remove
the face cover by pulling it upwards.
Slip tip d into slot e and push face
4 cover up until it snaps into place.
GR 029
24