Starter Switch Check - GMC Sierra Denali 2014 Owner's Manual

Hide thumbs Also See for Sierra Denali 2014:
Table of Contents

Advertisement

Insulation:
Removal of the noise shields or any
underhood insulation.
Engine:
Removal or rendering engine speed
governor, if the vehicle has one,
inoperative so as to allow engine
speed to exceed manufacturer
specifications.
Fan and Drive:
Removal of fan clutch, if the
vehicle has one, or rendering
clutch inoperative.
Removal of the fan shroud, if the
vehicle has one.
Air Intake:
Removal of the air cleaner
silencer.
Modification of the air cleaner.
Exhaust:
Removal of the muffler and/or
resonator.
Removal of the exhaust pipes
and exhaust pipe clamps.

Starter Switch Check

Warning
When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.
1. Before starting this check, be
sure there is enough room
around the vehicle.
2. Apply both the parking brake
and the regular brake.
Do not use the accelerator
pedal, and be ready to turn off
the engine immediately if it
starts.
3. Try to start the engine in each
gear. The vehicle should start
only in P (Park) or N (Neutral).
Vehicle Care
If the vehicle starts in any other
position, contact your dealer for
service.
Automatic Transmission
Shift Lock Control
Function Check
Warning
When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.
1. Before starting this check, be
sure there is enough room
around the vehicle. It should be
parked on a level surface.
2. Apply the parking brake. Be
ready to apply the regular brake
immediately if the vehicle begins
to move.
10-33

Advertisement

Table of Contents
loading

Table of Contents