Rear Window Wiper; Washer - GMC Yukon Denali 2015 Owner's Manual

5-4 Instruments and Controls
INT (Rainsense Wipe
Sensitivity): Turn the
band on the wiper lever to adjust the
sensitivity.
Turn the band up for more
sensitivity to moisture.
Turn the band down for less
sensitivity to moisture.
Move the band out of the
position to deactivate Rainsense.
z
AUTO (Rainsense On/Off):
z Press to turn Rainsense on or off.
FRONT
When turned on and
in one of the Rainsense wipe
sensitivity positions the wipers can
be adjusted for more or less
sensitivity to moisture. When turned
off, the wipers operate as timed
intermittent wipers and can be
adjusted for more or less frequent
wipes.
z
When
message displays to show that
Rainsense is on. If equipped, a
Rainsense indicator may turn on in
the instrument cluster if the ignition
INT
is in ON/RUN.
Windshield Washer
In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.
z
FRONT is
AUTO is turned on, a
{
Warning
L
(Washer Fluid): Push the
paddle marked with the windshield
washer symbol at the top of the turn
signal lever to spray washer fluid
and activate the wipers. The wipers
will continue until the paddle is
released or the maximum wash time
is reached. When the paddle is
released, additional wipes may
occur depending on how long the
windshield washer had been
activated. See Washer Fluid on
page 10-20 for information on filling
the windshield washer fluid
reservoir.

Rear Window Wiper/

Washer

The rear wiper control is on the turn
signal lever.