COMBO
Valve Assembly Wire/Connector Chart
(#)
(Connector)
1
BLUE
2
WHITE
3
BLUE
4
RED
5
WHITE
(To dispense softener, both the main and pre-wash solenoids are opened.
See page 16 for details.)
WM3677 COMBO
DISPENSER
1.
2.
3.
4.
5.
6.
7.
8.
(Wire)
Yellow and Black (dryer water - cold)
White and Black
Gray and Black
Blue and Black
Orange and Black (bleach - cold)
Page 37 of 68
Remove the top plate.
Remove the dispenser.
Remove the two screws from
the front of the dispenser.
Remove the clamp and the
large hose on the back of
the dispenser.
Leave the small feed hoses on
the dispenser.
Disconnect the electrical
connectors on the valves. The
connector and wire colors will
aid upon reassembly.
Remove the two screws that
secure the cold water valve
assembly.
Reassembly is the reverse
of these steps.
(Dispenser valve opened)
(main wash - cold)
(pre-wash - cold)
(hot input)
TRAINING MANUAL