Honda RSX 2004 Owner's Manual page 214

Main Menu Table of Contents
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
213 and 214 or the diagram on the
fuse box lid, which fuses control that
device. Check those fuses first, but
check all the fuses before deciding
that a blown fuse is the cause.
Replace any blown fuses, and check
if the device works.
1. Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
2. Remove the cover from the fuse
box.
FUSE
BLOWN
3. Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.
Check the smaller fuses in the
4.
under-hood fuse box and all the
fuses in the interior fuse box by
pulling out each fuse with the fuse
puller provided in the interior fuse
box.
Taking Care of the Unexpected
Fuses
CONTINUED
211