Main Menu
Table of Contents
Service Station Procedures
If the hood latch handle moves stiffly,
or if you can open the hood without
lifting the handle, the mechanism
should be cleaned and lubricated
(see page
173
).
124
Before Driving
SUPPORT ROD
Pull the support rod out of its clip,
3.
and insert the end into the hole on
the left side of the hood.
To Close the Hood
Lift it up slightly to remove the
support rod from the hole. Put the
support rod back into its holding clip.
Lower the hood to about a foot (30
cm) above the fender, then let it
drop. Make sure it is securely
latched.