Kenwood DNN991HD Instruction Manual page 20

iPod
1
Connect the iPod.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to
Video Basic Operation (P.68).
The unit reads the iPod and playback
starts.
ö To disconnect the iPod/iPhone
connected with the cable:
Touch [G] on the screen and disconnect
the device from the cable.
SD card (DNN991HD)
1
Music/
The panel fully opens.
2
Notched section
The unit loads the card and playback starts.
ö To remove:
Push the SD card until it clicks and then
remove your finger from the card.
The card pops up so that you can pull it out
with your fingers.
Return to the Top page
Press the <G> button for 1 second
to open the front panel.
0
Hold the SD card as the diagram
below and insert it into the slot
until it clicks.
Basic Operations
Labeled side
19