Voice Control (Dnn991Hd); Voice Control - Kenwood DNN991HD Instruction Manual

Return to the Top page

Voice Control

ñ
V
oice Control (DNN991HD)
The unit is equipped with Advanced Voice
Recognition function which allows you to
operate it with your voice. The supported
languages are US English, UK English, French,
German, Dutch, Italian, and Spanish. For
information on the voice commands, refer to
<Voice command table> (separate
NOTE
• ASR on the Language Setting screen should be
Language setup
set to "Enabled". See
Voice Control
1
Press the Push-To-Talk switch to enter
the Voice control mode.
The buttons enclosed in a green square
support the voice control.
128
2
Speak the command. (Ex: Speak "HD
RADIO" .)
volume).
(P.132).
The screen has changed to the HD Radio
Control screen.
You will hear a beep again.
3
Repeat the same procedure as step 2.
For information on the voice commands,
refer to
volume).
4
Press the Push-To-Talk switch to end
the voice control mode.
Ñ
To display the list of operable voice
commands.
1
Press and hold the Push-To-Talk switch.
The list of operable voice commands
appears. Pronounce a command.
NOTE
• To cancel the commands list display, press Push-
To-Talk switch or touch the screen.
<Voice command table> (separate
Displaying Voice Commands