Shutting Down The Implement; Loader Storage - RHINO 1595 Operator's Manual

Loader
Table of Contents

Advertisement

Carry bales as low to the ground as possible to
allow maximum visibility and avoid tipping.

7.2 Shutting Down the Implement

Park the tractor on a level surface, place the transmission in park or neutral and apply the parking brake, lower
the attached implement to the ground, shut down the engine, remove the key, and wait for all motion to come
to a complete stop before exiting the tractor. OPS-L- 0014

8. Loader Storage

Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Inadvertent contact with controls can cause the
Implement to shift or fall crushing themselves or others.
Properly preparing and storing the loader at the end of the season is critical to maintaining its appearance and
to help ensure years of dependable service. The following are suggested storage procedures:
Thoroughly clean all debris off the loader to
prevent damage from rotting grass and
standing water.
Lubricate all grease points detailed in the
maintenance section.
Tighten all bolts and pins to the recommended
torque.
Check worn and damaged parts.
repairs and make replacements immediately so
that the loader will be ready for use at the start
of the next season.
Store the loader in a clean, dry place resting
securely on parking stands at ground level.
Use spray touch-up enamel where necessary to
prevent rust and maintain the appearance of
the loader. OPS-L-0010_B
1595 01/11
© 2011 Alamo Group Inc.
OPERATION
Perform
Operation Section 4-37
(SG-25)
Parking Stand
.

Advertisement

Table of Contents
loading

Table of Contents