Lenovo ThinkCentre Hardware Maintenance Manual page 115

1. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside your computer. See "FRU locations" on page 67 for the locations of various components in
your computer.
2. Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear
of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer
cover.
3. Lower and position the computer cover into place and then slide the computer cover toward the bottom
of the computer until the cover is secured into place.
Figure 40. Installing the computer cover
4. Lock the computer cover if you have an integrated cable lock.
5. Reconnect the external cables and power cord to the computer.
6. Depending on the parts you installed or replaced, you might need to confirm the updated information in
the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 37.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
.
Chapter 8 Replacing FRUs
109