Modular DSL Router
Technical Specifications (cont)
•
NAT, PAT (IP
RFC2663 "IP Network Address Translator (NAT)
Masquerading)
Terminology and Considerations".
•
RFC3022 "Traditional IP Network Address
Translator (Traditional NAT)".
•
NAT ALGs
FTP (over NATP)
•
(Application
Gaming
•
Level Gateway)
Netmeeting
•
IPSec
(NAT Pass Through)
•
PPTP
•
NAT advanced
Port Forwarding
•
features
DMZ
•
Service Blocking
•
Web site blocking
•
Web Activity Log
•
Firewall
Stateful Firewall: multiple security levels.
•
Basic IDS: Stateful Packet Inspection for
prevention of Denial of Service (DoS) attacks.
•
Universal Plug
Internet Gateway Device (IGD) Standardized
and Play (UPnP)
Device Control Protocol V 1.0.
•
PPPoA
RFC 2364 "PPP Over AAL5".
•
PPPoE
RFC 2516 "Method for Transmitting PPP Over
Ethernet (PPPoE)".
RFC1483
Supports bridged 802.3 Ethernet frames over an
ATM network.
•
LLC encapsulation, in which an LLC/SNAP
header is prepended to the (Ethernet) frame.
•
VC multiplexing, in which a null two byte header
is prepended to the frame.
Default is LLC encapsulation; VC multiplexing can
be configured using console command or WEB
configuration.
•
RFC1483 "Multiprotocol Encapsulation over
ATM Adaptation Layer 5".
•
RFC1213 "Management Information Base for
Network Management of TCP/IP-based internet:
MIB-II".
•
RFC 2684 "Multiprotocol Encapsulation over
ATM Adaptation Layer 5".
•
Web Server and
RFC 1945 "Hypertext Transfer Protocol --
Web Based
HTTP/1.0".
•
Configuration
RFC 2068 "Hypertext Transfer Protocol --
HTTP/1.1". (Not full support).
•
RFC 2617 "HTTP Authentication: Basic and
Digest Access Authentication".
Creative Solutions for the Digital Life
™
•
Operating Range
Indoors:
Up to 13m (40 ft) @ 54 Mbps
Up to 17m (55 ft) @ 18 Mbps
Up to 37m (120 ft) @ 11 Mbps
Up to 91m (300 ft) @ 1 Mbps
•
Outdoors:
Up to 55m (180 ft) @ 54 Mbps
Up to 122m (400 ft) @ 18 Mbps
Up to 171m (560 ft) @ 11 Mbps
Up to 533m (1,750 ft) @ 1 Mbps
•
Environmental
Operating Temperature: 0°-40° Celsius
•
Operating Range
Humidity: 8-95% non-condensing
•
Power
Operating voltage:
Requirements
+12V DC +- 5% @ 600mA max