Adjustment (2) - Sony SDM-M61 Service Manual

SECTION 2
ADJUSTMENTS
2-1. FUNCTIONAL ALIGNMENT (1)
• Procedures of how to go to service mode.
1. Hold "+" and "-" key power on, SDM-M61 goes into service mode.
2. Press "MENU" key-----ODS display.
3. Press "-" key to go to second page's late icon.
4. Press "OK" key-----service menu display.
5. Select one of features.
6. Press "MENU" key to exit OSD.
7. Power OFF then ON again, monitor go to normal mode.
If you would like to enter service mode again, performing the above procedures cycle.
(N/A)
(N/A)
Note
1. N/A means "Not applied".
2. This service menu only provides both Configuration & Sync slice functions.
This other were used for design engineering. There is no guarantee of using those N/A functions.
OK
CONFIGURATION COLOR TEMP
INITIAL EE PROM
CHIPS
CLEAR ETI TIME
SYNC SLICE
(N/A) PRESET B/C/C
TMDS
(N/A) EEPROM TEST
EXIT
EXIT
●
☼ Off
ANALOG
DIGITAL (N/A)
(N/A)
INITIAL EE PRM
PERFORM
(N/A)
(N/A)
On
9300K
6500K
5000K
SUB-BRIGHTNESS
BRT 1
R
CON 1
G
EXIT
B
SUB-CONTRAST
R
G
9300K
B
6500K
5000K EXIT
BRT 2
CON 2
EXIT
SDM-M61(E)
2-1