Crown Boiler BIMINI SERIES Specifications

Cast aluminum heat exchanger
Microprocessor based control system with:
- Digital touch pad and display
- Outdoor reset temperature sensor
- Domestic hot water priority
Multiple venting options
- CPVC/PVC
- PPs - concentric polypropylene
- PPs - chimney vent liner
- AL29-4C Stainless
Six sizes from 70 to 225 MBH
Natural or LP gas
See back side for piping configurations
Wall mount model shown above.
BIMINI SERIES
RESIDENTIAL HIGH EFFICIENCY,
CONDENSING, GAS-FIRED,
HOT WATER BOILER
Bimini Buddy Hydraulic Separator
designed to be installed with any
wall-mounted Bimini boiler and in-
cludes all near boiler piping need-
ed for good hydraulic separation
and air elimination in a compact,
factory assembled package.
Three Models Available
BB100H - For heat only applications.
BB100I - For connection of a Bimini boiler to a heating sys-
tem and an indirect water heater like the Mega-Stor
BB100C - Combi unit with a plate heat exchanger and flow
switch for domestic hot water production in tight places.
www.crownboiler.com | Philadelphia PA
.
®