Registering Magic Remote Control; How To Use Magic Remote Control; Precautions To Take When Using The Magic Remote Control - LG LM86 Series Owner's Manual

registering magic remote
control
It is necessary to 'pair' (register) the magic remote
control to your TV before it will work.
How to register the magic remote control
1
To register automatically, turn the TV
on and press the wheel(OK) button.
When registration is completed, the
completion message appears on the
screen.
2
If registration fails, turn the TV
off and back on, then press the
wheel(OK) button to complete
registration.
How to re-register the magic remote control
1
Press and hold the BACK and
HOME buttons together for 5
seconds to reset, then register it by
following "How to register the magic
remote control" above.
2
To re-register the magic remote
control, press and hold the BACK
button for 5 seconds toward the TV.
When registration is completed, the
completion message appears on the
screen.
How to use magic remote
control
1
If the pointer disappears, move the
magic remote control slightly to left
or right. Then, it will automatically
appear on the screen.
» If the pointer has not been used
for a certain period of time, it will
disappear.
2
You can move the pointer by aiming
the pointer receiver of the magic
remote control at your TV then move
it left, right, up or down.
» If the pointer does not work
properly, leave the magic remote
control for 10 seconds then use it
again.
MAGIC rEMOTE CONTrOL FUNCTIONS
My Apps
If you press wheel(OK) on the magic
remote control, the screen appears.
Shows information about the current
programme and screen.
Pressing this button will display number
keypad which you can select programme
number.
You can select My Apps Menu.
Precautions to take when
using the magic remote
control
y Use the magic remote control within the maxi-
y
mum communication distance (10 m). Using
the magic remote control beyond this distance,
or with an object obstructing it, may cause a
communication failure.
y A communication failure may occur due to
y
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the magic remote
control.
y The magic remote control may be damaged or
y
may malfunction if it is dropped or receives a
heavy impact.
y Take care not to bump into nearby furniture
y
or other people when using the magic remote
control.
y Manufacturer and installer cannot provide
y
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y It is recommended that an Access Point (AP)
y
be located more than 1 m away from the TV. If
the AP is installed closer than 1 m, the magic
remote control may not perform as expected
due to frequency interference.
29