Viewing Images - Sony bloggie MHS-CM5 Handbook

Troubleshooting
The recording date is not superimposed on an image.
This camera does not have a feature for superimposing dates on images.
•
The screen is too dark or too bright.
• Adjust the brightness of the LCD backlight (page 46).
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 3).
•

Viewing images

Your camera cannot playback images.
Press (Play) button to change to the playback mode (page 25).
•
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The memory card may be damaged. Exchange the memory card for another one.
•
The date and time are not displayed.
In the default settings in effect when you purchased the camera, DISP is set to AUTO. So
•
indicators on the screen disappear after about 5 seconds. If you want to make indicators
appear again, tilt the multi-selector to v (DISP) (page 23).
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
The image does not appear on the TV screen.
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
your TV (page 47).
• Check whether the connection is correct (page 51).
• If the USB connection support cable is connected to the camera and the computer, disconnect
it.
You cannot view the image or hear the sound on the TV.
When you are using the component video plug, make sure the red and white plugs of the A/V
•
connecting cable are connected (pages 51, 52).
57