Sony bloggie MHS-CM5 Handbook page 52

Viewing images on a TV
Connecting to a high definition TV
Images recorded with HD (high definition) image quality are played back with HD (high
definition) image quality. Images recorded with SD (standard definition) image quality are
played back with SD (standard definition) image quality.
A/V OUT jack
You cannot connect the HDMI cable and the component A/V cable at the same time.
•
When connecting with the component A/V cable (sold separately)
If you connect only component video plugs, audio signals are not output. Connect the white
•
and red plugs to output audio signals.
The output settings switches automatically according to the images played back. Therefore,
•
the image may be distorted when switching the mode on the connected TV.
If you record movies in HD (high definition) image quality [1920 × 1080 30P], [1280 ×
•
720 60P], or [1280 × 720 30P] while connecting the camera to high definition TV with a
component cable, the image output to the TV is shown in SD image quality.
When connecting with the HDMI cable (sold separately)
Do not connect the camera and equipment to be connected using output terminals. When the
•
camera and TV are connected using output terminals, no video and sound are produced.
Such a connection can also cause trouble of the camera and/or connected equipment.
This function may not work properly with some HD TVs. For example, you may not be able
•
to view a video on your HD TV or hear sound from the HD TV.
Use an HDMI Cable with the HDMI logo.
•
52
HDMI jack
HDMI OUT jack
HDMI cable
(sold separately)
COMPONENT AUDIO
Green/Blue/
Red
Component A/V cable
(sold separately)
White/Red