Figure 42. Removing the foot stands
5. Locate the LCD panel in the computer. See "FRU locations" on page 86.
6. Remove the optical drive. See "Replacing the optical drive" on page 98.
7. Remove the inverter. See "Replacing the inverter" on page 113.
8. Remove the rear I/O assembly. See "Replacing the rear I/O assembly" on page 100.
9. Remove the system board shield. See "Removing and reinstalling the system board shield" on page 102.
10. Disconnect the LCD panel cable from the system board. See "System board parts and connectors"
on page 88.
Figure 43. Disconnect the LCD panel cable from the system board
.
Chapter 8
Replacing FRUs
121