Sony Trinitron KV-32FV27 Service Manual page 178

Installing the TV
12
(Continued from the previous page)
1
Connect the Cable TV cable to the TV's VHF/UHF jack.
2
Using a coaxial cable, connect the TV's TO CONVERTER jack to
the cable box's IN jack. The TV's internal converter allows you to
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.
3
Using a coaxial cable, connect the cable box's OUT jack to the
TV's AUX jack.
Cable box
IN
To switch between channels from cable box and channels from regular cable
Press the ANT button on the TV remote control. (This is a toggle:
pressing the button once selects the cable box; pressing the button
again selects regular cable.)
To use the cable box
Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the cable box to switch channels.
To use the TV remote control to switch channels on the cable box
Program the remote control as necessary. (See "Programming the
Remote Control" on page 52.) Then use the remote control to
switch cable box channels.
To use the TV remote control to switch channels on the VCR
Program the remote control as necessary. (By default, the reomte
control is set for a Sony VCR; to change to another brand see
"Programming the Remote Control" on page 52.) Then use the
VCR buttons on the remote control to switch channels on the
VCR.
To prevent the accidental switching of TV channels
When using the cable box, you need your TV to stay on a
required channel (usually channel 3 or 4). You can use the TV's
Channel Fix feature to lock in a specific channel. The Channel Fix
feature is under the Channel menu. For details, see "Using the
Channel Menu" on page 42.
75-ohm coaxial cable
(not supplied)
3
OUT
2
75-ohm coaxial cable (not supplied)
1
CATV cable (unscrambled channels)
AUX
Rear of TV
TO CONVERTER
Rear of TV
VHF/UHF
Rear of TV