Sony Trinitron KV-32FV27 Service Manual page 114

Back Panel Descriptions
Connection Description
1AUX Allows you to view local and cable channels if your cable
(KV-36FS17) provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in PIP.
2TO CONVERTER This is a VHF/UHF out jack that lets you set up your TV
(KV-36FS17) to switch between scrambled channels (through a cable
box) and normal cable channels (CATV). Use this jack
instead of a splitter to get better picture quality when
needing to switch between scrambled and unscrambled
cable channels.
3VHF/UHF Connects to your VHF/UHF antenna or cable.
4S VIDEO Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
5AUDIO (L/R)/
Connects to the audio and video OUT jacks on your VCR
VIDEO or other video component. A third video input (VIDEO
2) is located on the front panel of the TV. The Audio and
Video IN jacks provide better picture quality than the
VHF/UHF jack.
6Y, P , P , L, R Connects to your DVD player's or Digital Set-top box's
B R
component video (Y, P
7AUDIO OUT Connects to the left and right audio inputs of your audio
(VAR/FIX) or video component. You can use these outputs to listen
L (MONO)/R to your TV's audio through your stereo system.
Installing the TV
, P ) and audio (L/R) jacks.
B R
11