Hunter Ceiling fan User Manual page 19

Operation, Maintenance, & Cleaning (continued)
Metal
Plate
Globe
Keeper
Finial Cap
Finial
Changing the bulbs - unscrew the finial and
remove it from the threaded rod. Remove the
finial cap and unscrew the globe keeper while
supporting the globe with your other hand.
Carefully remove the globe. Unscrew bulbs
and replace with bulbs of same type and
wattage. Reinstall the globe assembly.
Globe
When cleaning the fan, use soft brushes
or cloths to prevent scratching. Cleaning
products may damage the finishes.
M3543-01 • 11/25/13 • © Hunter Fan Company
Safe-Exit
The Safe-Exit Program gives you about thirty seconds
of light when you turn the lights off to exit the room
before the lights go out. To use Safe-Exit:
• Press the Fan Off button for at least three seconds to
initiate the Safe-Exit Mode.
• The lights will flash for visual confirmation.
• The lights will stay on 50% brightness for 15 seconds and
then begin to dim. After a total of 30 seconds, the lights
will be completely off.
Note: For CFL lighting, the lights will stay on 100%
brightness for 30 seconds. After a total of 30 seconds, the
lights will be completely off.
For questions regarding removing a light kit, call
19 19
www.HunterFan.com
customer service 1-888-830-1326.
1.888.830.1326