Related Manuals for Hoover S3755050
Summary of Contents for Hoover S3755050
- Page 1 WindTunnel Bagless Canister Cleaner with Powered Nozzle ® www.hoover.com Review this manual before operating cleaner. Owner’s Manual English pp. 1-11 Español pàg.12-17 Français p.18-23...
-
Page 2: Table Of Contents
Your cleaner is model________________________________________________________ and has serial number ______________________________________________________ It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your Hoover product. Index Assembling Cleaner ...3 Cleaner Description...4... -
Page 3: Assembling Cleaner
If you should happen to need assistance during assembly or operation, Visit us online at www.hoover.com to find the service outlet nearest you (click on the “Service” button) OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. -
Page 4: Cleaner Description
2. How to use Cleaner description The assembled cleaner will look like the drawing. 1. WindTunnel™ carpet and floor power nozzle: automatically adjusts to different carpet pile heights 2. Headlight 3. Quick disconnect pedal: step on pedal to separate wand from power nozzle 4. -
Page 5: Powered Nozzle
Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. -
Page 6: Edge Cleaning
Edge cleaning Special edge groomers are provided on both sides of the nozzle to remove dirt in carpet near baseboards and furniture. Guide side of nozzle parallel to edge of carpet or furniture as shown. How to clean stairs Place cleaner on stair. Using the furni- ture nozzle, clean stairs from bottom to top. -
Page 7: Replacing Power Nozzle Belt
What to buy There are other belts manufactured that are similar in shape and size, but are not designed for the HOOVER power nozzle. Such belts do not operate the agitator cor- rectly and may create stress which could damage your power nozzle. Use only a genuine HOOVER Belt part no. - Page 8 Return nozzle to original position and lift off hood. 3-11 If belt is not broken but is stretched or cut, pull it off the motor pulley (H). 3-14 Replace brush roll cover (G) over agita- tor brush roll. Replace 3 short screws. Remove brush roll cover (G) by remov- ing the 3 Phillips head screws.
-
Page 9: Lubrication
Headlight replace- ment The headlight, located on top of the power nozzle, operates when the clean- er is turned on. Use only HOOVER part no. 27317-307, which is a fused bulb, when replacing the headlight. How to replace Disconnect cleaner from electrical outlet and disconnect power nozzle from extension wands. -
Page 10: If You Have A Problem
• calling 1-800-944-9200 for an auto- mated referral of authorized service outlet locations (U.S. only). Please do not send your cleaner to Hoover in North Canton for service, this will only result in delay. If further assistance is needed, contact the Hoover Consumer Response Center, Phone: 330-499-9499. -
Page 11: Warranty
This warranty does not cover pick up delivery, or house calls; however, if you mail your appliance to a Hoover Sales and Service Center for warranty service, transportation will be paid one way. While this warranty gives you specific legal rights, you may also have other rights which vary from state to state.