Fostex HP-V1 Owner's Manual page 2

Introductions
HP-V1 is a high performance portable headphone amplifier which provides high-quality
sound.
The unit amplifies the sound of playback equipment with a line out terminal such as a
portable audio player, and outputs through the headphones.
„ Features of the HP-V1
„
• The unit consists of tube in the initial stage and an operational amplifier in latter stage
• Excellent sound enabled by our original film capacitor and electrolytic capacitor born from our
speaker network technologies developed over many years
• Equipped with a headphone amplifier gain switch and supports wide range impedance
• Connect to an audio player easily through the audio input terminal on the front and the back of the
unit
• Fin-shaped body aids heat dissipation
„ Accessories
„
Supplied accessories are listed below. Confirm that accessories are present after purchase.
• AC adapter × 1
• HiFC 3.5 mm Stereo mini phone cable
* HiFC is a registered trademark of Hitachi Metals, Ltd.
• Safety information sheet × 1
• Owner's Manual (this book) × 1
„ Caution
„
<Low temperature burn>
The unit may reach a temperature higher than body temperature depending on your
environment. Please note that you may get burned if your skin is in contact with or near the
unit directory for a long time.
<Radio wave interference>
If you connect an audio player which is also a communication device such as a smartphone,
the sound may have noise due to radio wave interference depending on the model of your
device. The noise may be removed if you change the communication mode of your device
to one which blocks communication signals such as airplane mode.
2