Sharp AR-D21 Service Manual page 4

Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1. Remove the rear cover from the copier.
Remove the two screws and then remove the rear cover from the
copier.
2. Remove the rear cover from the optional paper feed unit.
Remove the two screws and then remove the rear cover from the
optional paper feed unit.
3. Remove the connector cover.
Remove the cover from the connector.
Connector cover
Screw
Rear cover
Screw
Screw
Rear cover
Screw
AR-D21/D22 UNPACKING AND INSTALLATION
4. Attach the copier
Place the copier on the optional paper feed unit and remove the second
and third paper trays.
Connect the copier to the paper feed unit using four fixing plates and
two screws (M4 x 12) for each plate.
Front side
Screws (M4 x 12)
Detailed view
Fixing plate
Screws (M4 x 12)
Left of rear side
Fixing plate
Screws
(M4 x 12)
– 2 –
Fixing plate
Right of rear side
Fixing plate
Screws
(M4 x 12)