Basic Function; Specifications - Boss Audio Systems BV9356I User Manual

BASIC FUNCTION

1. PWR/VOL button
Press this button will turn on power, during working longer press this button will turn off
power, on any mode, shortly press will return main menu, rotate this button will adjust
volume level.
2. MUTE button
Press this button to shut off sound output, repress this button to resume sound output;
Press this button longer to turn on/off TFT LCD display.
3. MODE button
When the unit is power on, Repeat press this button can switch to different function
mode as following picture.
Note: When the device without connecting to USB、SD or DVD
no disc inside, the system will automatically skip these related
working mode.
4. SD slot
Insert SD card, the unit will play the files automatically.
5. RST
Press this button and this unit will be restored to the initial state.
6. Dual (front and rear) USB
Insert USB removable device so as to read audio/video files.
Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.
7. Dual (front and rear) AUX
To input external audio.
Warning: You can only use either front or rear AUX at a time. Never connect both
front and rear AUX at the same time.
8. IR
To receive infrared signal from the remote control.
9.
Press this button can eject the disc.
10. Disk load slot
Opening for disks to enter or retreat.
Media
03

SPECIFICATIONS

Power supply
Power range
Max Current Consumption
Ground system
Power Output
FM tuner
US frequency range
European frequency range
Signal / Noise ratio
Stereo separation
Search station volt
AM tuner
US frequency range
European frequency range
Limit noise sensitivity
DVD player
S / N Ratio
Frequency response
This unit is with switchable frequency.
You can switch from USA frequency to Europe frequency by following the below steps:
Step1. In main menu, press setup icon to enter the setup interface.
Step2. Press the Radio icon, and insert password 123456, then press "OK",
the menu from which you can select the radio frequency will show.
Step3. Press "Radio region" and select the desired frequency by pressing the "up"
and "down" arrow, then press it and setting is finished.
INSTRUCTIONS
DC 12V
10.8-16.0V DC
15A
Negative ground
80 WattsX4 Channels
87.5-107.9MHz
87.5-108MHz
55dB
30dB
20-30dBuv
530-1710KHz
522-1620KHz
32dB
70dB
20Hz-20KHz
16