Playback - Panasonic DVD-S500 Owner's Manual

Playback

Turn on the TV and select the correct video

input.
Press ^.

Place a disc or connect a USB device.

• If this unit is not switched to the USB mode
when connecting the USB device, press USB
and press w q to select the item.
Press e r w q to select the item and press

OK.
• Depending on the disc, playback may start
automatically.
(JPEG only)
• When you press PLAY/PAUSE q/h instead
of OK, you can start the slide show.
Stopping playback
Press STOP g.
 The stopped position is memorized.
Power Resume function
Press PLAY/PAUSE q/h to restart from this
position.
This position is memorized even after power
outage (Power Resume). However, if the
restart position is misaligned or depending on
the media and playback conditions, the unit
may not operate normally.
NOTE
• Screen saver will start automatically if the media
playback is stopped and the menu is closed for about
5 minutes.
• The player will automatically switch to Power Standby
mode if you do not press any buttons for about
25 minutes after the media has stopped playing.
• During playback of DTS source, there will be no sound
from the speakers. Select a different audio source (e.g.
Dolby Digital).
(DVD-S700 only)
Or please connect the unit to an AV receiver that can
decode DTS via an HDMI terminal, and set "Audio

Out" to "Bitstream" ( page 11).
9