Removing Front Power LED and IR Board
Removing Front Power LED and IR Board
To remove the Ft Power LED and Ft IR board,
To remove the Ft Power LED and Ft IR board,
Remove the 2 screws in the Front IR PWB
Remove the 2 screws in the Front IR PWB
1
Remove the 1 screw at the bottom of the Power LED PWB.
Remove the 1 screw at the bottom of the Power LED PWB.
2
Ground
snap
Ground
Strap
screw
Note, the left screw in step 1 has a ground strap
Note, the left screw in step 1 has a ground strap
1
lug. Make sure to return it when reinstalling the
lug. Make sure to return it when reinstalling the
board. This ground snaps into the Bottom Metal.
board. This ground snaps into the Bottom Metal.
Front IR PWB
1
33
Power LED PWB
Screw
2
Cabinet
Bottom
Note, this screw has an
Note, this s
2
Oversized washer which
locks the board in place.
August 2009 Plasma 50PS80
Bottom
Metal