Panasonic PT-CW330 Specifications page 12

Ultra short-throw dlp projectors

Hide thumbs Also See for PT-CW330:

Table of Contents

Ultra Short-Throw DLP

Notes on projector placement and operation

The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the

following precautions.

Never place objects on top of the projector while it is operating.

Make sure there is the unobstructed space as shown below or more around the projector's exhaust

openings. In addition to this space, also ensure that there is a sufficient work space for removing

and installing the lamp, air filter and other parts.

Make sure that nothing blocks the projector's air intake and exhaust openings. Also, install the pro-

jector so that cool or hot air from other air conditioning equipment does not flow directly toward the

projector's air intake or exhaust openings.

Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed

space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the

intake opening. This may cause the projector's protective circuit to interrupt projector operation.

100 mm (3-15/16˝)

or more

Direction of air intake and exhaust

As of June 2013

SFD12M017-2

™

Projector

500 mm (19-11/16˝)

or more

PT-CW330

1000 mm (39-3/8˝)

or more

Intake

Exhaust

1 2 / 1 3

Table of Contents