1-1-4. Operation Panel Door
1. Open the operation panel door (1).
2. Release two claws and unhinge the door (1).
1-1-5. RAM Drive
1. Peel off four tapes (1).
2. Disconnect two flexible cables (2).
3. Disconnect the connector (3).
4. Remove two screws (4) and acrylic board (5).
5. Remove four screws (6), then remove the RAM drive (7).
Claw
A
Remove the connector claw
in the direction indicated
by the arrows to release the
flexible cable.
Front panel
Hinge
Claw
Operation panel door (1)
Tapes (1)
RAM drive (7)
Flexible cable (2)
A
Connector
Flexible cable (2)
Claw
Hinge
Fig. 2-1-4
Connector (3)
Flexible
cable (2)
Fig. 2-1-5
Screws (6)
Tape (1)
Acrylic
board (5)
Screws (4)